Full-size NGFF M.2 B Key/mSATA SSD to 2.5 SATA3 Adapter 2 in 1 with Plastic Enclosure
Productdetails:
Plaats van herkomst: | China |
Merknaam: | BQZYX |
Modelnummer: | ZYX259 |
Betalen & Verzenden Algemene voorwaarden:
Min. bestelaantal: | 50-100pcs |
---|---|
Prijs: | $1.5 per unit |
Verpakking Details: | Elektrostatische Zak |
Levertijd: | 10-15 werkdagen |
Betalingscondities: | T/T, Western Union |
Levering vermogen: | 190000 stuks per maand |
Gedetailleerde informatie |
|||
Merknaam: | BQZYX | Productnaam: | SATA-protocol 2-in-1 SSD naar SATA 3.0 adapter |
---|---|---|---|
Productinterface: | SATA 2,5 inch SSD | SSD-slot 1: | NGFF (M.2) KEY-B |
Ondersteunbare SSD Grootte 1: | 22 x 30 mm (Sata-protocol) | Ondersteun SSD Grootte 2: | 22 x 42 mm (SATA-protocol) |
Ondersteuning van SSD-grootte 3: | 22*60 mm (SATA-protocol) | Ondersteuning van SSD-grootte 4: | 22 x 80 mm (SATA-protocol) |
SSD-slot 2: | mSATA | SSD-grootte: | Volledig formaat |
Grootte van de adapterplaat: | 100*70 | Uitgangsinterface: | Sata 3,0 |
Markeren: | mSATA SSD to 2.5 SATA3 Adapter,NGFF M.2 B Key 2.5 SATA3 Adapter |
Productomschrijving
This 2-in-1 SSD adapter card supports dual SATA protocols, converting M.2 NGFF or mSATA SSDs to standard 2.5" SATA 3.0 interface with a protective plastic enclosure.
- Supports full-size mSATA SSDs
- Compatible with NGFF M.2 Key B SATA-bus SSDs
- Accommodates four M.2 SSD sizes: 2230/2242/2260/2280
- Transparent to operating systems - no drivers required
- Supports SATA3/6Gbps interface speeds


Parallel layout with two independent slots for M.2 NGFF Key-B and mSATA SSDs, optimized for stable signal transmission and easy operation.
Supports all common M.2 SATA SSD sizes (2230/2242/2260/2280) and full-size mSATA SSDs, with gold-plated connectors for reliable contact.
Mechanical switch allows easy selection between M.2 and mSATA SSD modes without physical drive swapping.
2.5" form factor plastic case matches standard hard drive dimensions for easy installation in any compatible bay.
Pin | Signal | Definition |
---|---|---|
1 | GND Ground | Grounding, usually connected to the negative pole |
2 | A Transmit+ | Positive signal interface for data transmission |
3 | A Transmit- | Data transmission negative signal interface |
4 | GND Ground | Grounding, usually connected to the negative pole |
5 | B Receive- | Data receiving negative signal interface |
6 | B Receive+ | Data receiving positive signal interface |
7 | GND Ground | Grounding, usually connected to the negative pole |

Pin | Signal | Wire Color | Definition |
---|---|---|---|
1 | +3.3VDC | Orange | DC 3.3V positive power supply pin |
2 | +3.3VDC | Orange | DC 3.3V positive power supply pin |
3 | +3.3VDC | Orange | DC 3.3V positive power pin, pre charged |
4 | GND | Black | Grounding, paired with first circuit |
5 | GND | Black | Grounding, paired with second circuit |
6 | GND | Black | Grounding, paired with third circuit |
7 | +5VDC | Red | DC 5V positive power pin, pre charged |
8 | +5VDC | Red | DC 5V positive power supply pin |
9 | +5VDC | Red | DC 5V positive power supply pin |
10 | GND | Black | Grounding, paired with second circuit |
11 | Optional | Black | Reserved pin |
12 | GND | Black | Grounding, paired with first circuit |
13 | +12VDC | Yellow | DC 12V positive power pin, pre charged |
14 | +12VDC | Yellow | DC 12V positive power supply pin |
15 | +12VDC | Yellow | DC 12V positive power supply pin |
- Computer manufacturing - flexible storage configuration for laptops and desktops
- Device upgrades - modernize older systems with mSATA or M.2 SSDs
- DIY projects - create custom storage solutions with multiple SSD types
- 1 x PCBA Adapter
- 1 x Screw Driver
- 4 x M2 Silver Screws
- 4 x M2 Black Screws
- 1 x Standoff









